How to Fix Broken PSP Games

Put the soft cloth down on a work surface. Take the UMD PSP game with the broken plastic case and insert the jeweler's screwdriver into the seam between the front and back halves of the plastic case. Wiggle the jeweler's screwdriver to separate the two halves of the plastic case. Remove the UMD from the separated halves and put it down on the soft cloth with the printed text and picture side facing up. Discard the broken halves of the plastic case.

Separate the two halves of the UMD demonstration disc's plastic case using the jeweler's screwdriver. Remove the UMD from the two halves and discard it. Put the two halves of the UMD demonstration disc's plastic case down on the soft cloth.

Pick up the front half of the UMD demonstration disc's plastic case that has printed text on it. Put the half down on the soft cloth with the printed text face down.

Pick up the UMD PSP game disc and place it with the printed text and picture face down onto the front half of the UMD demonstration disc's plastic case. Pick up the back half of the UMD demonstration disc's plastic case. Apply bonding glue around the rim of the half. Place the half down over the UMD disc and flat up against the front half. Make sure the cut out slot of the back half is facing you at the nine o'clock position. Hold the two halves together until the bonding glue takes hold. Let the bonding glue set.

Pick up the UMD PSP game and insert it into the PSP's UMD disc drive. Turn on the PSP and enjoy playing the game that was broken and now is fixed.