Home >> Collecting >> Antiques

Packing an Antique Plate for Mailing

Sending your prized antiques to others can be risky business. Proper packing of antiques is important to prevent breakage of priceless collectible items. Due to the large volume of packages handled every day by the United States Postal Service and other shippers such as UPS or FedEx, marking the box as "fragile" is not sufficient to protect the contents inside. Over packing the plate with plenty of packing material such as crumpled newsprint and foam packing peanuts will help to ensure your antique stays in one piece.

Things You'll Need

Plain newsprint
Bubble wrap
Shipping box
Packing peanuts
Packing tape

Instructions

- 1
  Wrap the plate in unprinted newsprint. Using old newspapers may transfer ink to the plate that may be difficult to clean off, so it is important to use newsprint without ink.
- 2
  Wrap the covered plate in a layer of bubble wrap. Tape the sides so the plate does not slip out of the bubble wrap layer.
- 3
  Choose a box at least three inches larger than the dimensions of the plate. A large box will ensure there is enough packing material surrounding the plate to cushion it while mailing.
- 4
  Fill the bottom of the box with packing peanuts or wadded newsprint. Place the plate on top of the packing peanuts and fill the rest of the box with packing material. Seal the top and bottom of the box with tape.
- 5
  Shake the box gently. If movement inside can be felt, open the box and add additional packing material.
- 6
  Mark the box "FRAGILE" on all sides with a red or black marker. Your markings should be large and easily readable. The package is ready to send.

Antiques