How to Buy an Original Candlestick Telephone

Spotting a fake candlestick phone is essential before you can buy an authentic original candlestick phone. Look for the words American Telephone Company, American Tel. and Tel. Co, or Western Electric Co. on the tag. The tag itself should be applied with two rivets on either side; if the tag appears to be glued on, it is not authentic.

Check the positioning of the finger stop. The finger stop is the little curved piece of metal that stops the finger when you dial. Original candlestick phones have the finger stop located close to the 3:00 position if the dial face were a clock. Reproduced candlestick phones tend to place the finger stop around the 5:00 position.

Notice how the stop is mounted onto the phone. A reproduction of an original candlestick phone is likely to be mounted with a Phillips style screw. Since this kind of screw did not exist when the original phones were made, the appearance of a Phillips screw indicates it likely is not authentic.

Inspect the grain of the phone to see if it is straight if the candlestick telephone is made of wood. Most wood used to produce original candlestick telephones was made of quarter-sawn oak instantly recognized by its jagged grain pattern.

Notice how far away from the phone the receiver hangs. Original candlestick telephones have very little distance between the receiver and the box. If the switch on which the phone hangs leaves it too far away from the base, it is probably a reproduction.

Search the Internet or antique stores or an auction to find an actual original candlestick phone, but with the knowledge you now possess of how fakes are made, you are more likely to avoid buying a fake. Conduct an appraisal by a licensed appraiser before buying any candlestick telephone to ensure you are not being taken.