Zillionz Smart Coin Bank Instructions

Install batteries into the Zillionz Smart Bank. Turn the bank over and use a Phillips-head screwdriver to remove the screw at the top of the battery compartment cover. Insert two AA batteries, making sure to match the polarity as instructed. Replace the battery cover and tighten the screw with the screwdriver.

Insert coins into your bank. Place the bank on a flat, level surface. Do not tilt the bank when you are using it; doing this can lead to sorting errors. Insert one coin at a time into the coin slot on the top of the bank. Allow each coin to drop all the way down before inserting the next one. Your total will be displayed on the LCD screen. Turn the bank over and press the "Reset" button if you wish to clear out your total.

Withdraw coins from your Smart Bank. Hold the bottom of the bank steady and rotate the body clockwise until the amount you wish to withdraw is lined up with the dispenser slot arrow -- it will click into place when it is aligned properly. Squeeze the dispenser tab to release the coin from the slot at the bottom of the bank. Squeeze once for each coin you wish to withdraw. Your total will be deducted from the balance and will be displayed on the LCD screen.

Maintain your Smart Bank. Store the bank indoors at room temperature and keep the bank clean and dry. Periodically wipe the bank with a damp cloth to keep it clean. Keep it away from water and immediately wipe the bank dry if it gets wet. Handle your bank with care and do not drop it.