How to Dress a Vintage Wicker Pram

Clean the wicker. Use a vacuum wand with a thick brush to suck dirt from the woven crevices. Use a soft-bristled brush dipped in a 50-50 bleach and water solution to remove mold. Allow the wicker to dry completely.

Freshen the look of the wicker with a stain. Oil-based stains work best. Prep the wicker by applying a mixture of one-part turpentine to two-parts boiled linseed oil, with a soft brush. The wicker is ready to stain after a 24-hour drying period.

Determine the measurements for upholstery, if desired. Measure the dimensions of the inside of the pram, and plan for a cushion to cover the bottom and the back. If the pram has solid sides, bumpers along the sides may also be added. Pram styles with a more open weave or structural design on the sides do not require this.

Choose authentic textiles. Victorians preferred lush fabrics in rich colors, so select among fabrics in silk, tapestry, damask or velour. Look for deep, rich colors like sapphire blue, cardinal red or emerald green. Consider wool or down as stuffing for the pram cushions.

Add finishing touches, such as a lace edging to cushions. Victorians would adorn their carriages in ribbons and bows. Some wicker prams had parasols attached to the back or sides. These umbrellas, designed to provide shade for the baby, were covered in silk or satin. Add ribbons or a lace trim to the parasol.