Hobbies And Interests
Things You'll Need
Instructions
Set up a target at a distance of approximately 100 feet.
Attach the appropriate adapter for the caliber of rifle you're using to the end of the laser's stem by screwing it into position with a small flat-head screwdriver. The screw goes through the plastic adapter and directly into the end of the stem.
Insert the end of the bore sighter as far down the rifle barrel as it will go.
Turn on the laser and aim your rifle at the target. Notice where the beam hits your target; that is, your projected point of impact and where you want your scope's cross hairs centered.
Manipulate the scope adjustment dials located on the top and right side of your scope. Adjust the cross hairs so that they intersect on the laser beam. To move the cross hairs down or up, rotate the top dial clockwise or counterclockwise. To move them right or left, rotate the dial on the right side of the scope counterclockwise or clockwise. When the cross hairs meet on the beam, you have successfully sighted in your scope.
Turn off the laser and remove the bore sighter.