How to Take Apart an M15a4 Airsoft Gun

The Classic Army Armalite M15a4 Airsoft Gun is a full-size replica of the AR-15 assault rifle. The rifle is battery operated and shoots 6 mm pellets. Classic Army has licensing rights on the Armalite trademark and stamps each lower receiver accordingly (Armalite is the company that first designed the AR-15 rifle). The rifle has a magazine capacity of 300 pellets and fires pellets at 350 feet per second for a range between 160 and 180 feet. Since this rifle is electric, the disassembly procedures are basic and further disassembly is not recommended.

Things You'll Need

• Flat-head screwdriver

Show More

Instructions

1. • 1

     Use a flathead screwdriver to unscrew and remove the frame lock pin on the lower receiver (located adjacent to the barrel).

   • 2

     Separate the upper receiver from the lower receiver by pulling it forward. Exercise caution not to damage the wire affixed to the lower receiver.

   • 3

     Remove the barrel by pulling it out of the assembly.

   • 4

     Open the ejection port cover on the right-hand side of the upper receiver (the cover is held in place magnetically).

   • 5

     Adjust the dial in the hop-up chamber (located inside the ejection port) to desired feed speed.