Hobbies And Interests
Instructions
Turn the "Sensitivity" switch to the right until you hear a click and the "Power" light turns on to indicate you have powered up the metal detector. Turn the knob over until it lines up with the "3" position, which is the optimal sensitivity. If you hear a lot of static or random beeping from the unit, turn the sensitivity down to reduce interference.
Move the "Mode" toggle switch to the position that corresponds to the type of searching you want to do. Moving it to the middle position will turn the detector to "All Metal" mode in which all types of metal will be detected.
Move the switch to the left to turn on "Full Discriminate" mode that will prevent trash items from being detected. Move it to the right to use the "Tone Discriminate" mode that will cause two different tones to be heard depending on if the object is trash or more valuable.
Insert your arm through the arm sling and grasp the handle of the detector firmly. Walk in a straight line with the coil about 1 to 2 inches above the ground. As you walk, slowly sweep the coil back and forth, keeping it level with the ground as you go.
Stop when you hear a beep from the unit. Depending on your settings, beeps indicate that objects are located underground at that location. Move the coil around until you hear steady beeping to zero in on the location of the item.