How to Make a Homemade Carnival Style Dart Game

Attach the 2x4s to the ply wood one on each side. Make sure there is an overage of the 2x4s at the bottom of the ply wood. The excess of 2x4s on the bottom will be inserted into the ground. Take the third 2x4, cut in half and use as a non-attached rear support for the ply wood.(lean the third 2x4 against the back, after it is inserted in the ground)

Before placing the ply wood in the ground, lay it flat face up. Now, nail the stick board to the ply wood, near the top. (use thin long nails, be careful not to split the wood on the stick board)

If using balloons, blow them up 1/2 way and attach them to the stick board in rows using the thumb tacks.(place the thumb tacks in the neck of the balloons, as not to rupture the balloon. If using posters, attach the posters in rows using the thumb tacks.(one in each corner of the posters)

Place the ply wood in the ground, add the rear support beam, place the prizes in plain sight, and let the fun begin.