Things You'll Need
Instructions
Hook the trailer up to the truck and plug in blinker and brake light system. Check to make sure everything works correctly by turning on the blinker and stepping on the brake pedal as someone stands behind the trailer to indicate the corresponding signals are functioning.
Put the dunk tank on the trailer at the rental center. Lay the tank on its side to avoid obstructing line of sight in the rear-view mirror. Strap it down tightly; testing the straps to make sure the tank is secure.
Select a level area at the location with access to water to facilitate set up. Back the truck up to the site and remove the tie straps. Disconnect the trailer as several people help guide the dunk tank down the trailer bed until it is in an upright position on the ground. Adjust the tank until it is in the correct position for use and follow the manufacturer instructions for setting up the seat, lever and other tank accessories.
Run a water hose from a nearby water access point and into the tank. Fill the dunk tank with water according to the manufacture's specifications. Check to make sure there are no leaks or cracks.
Test the dunk tank to make sure it works properly by throwing water balloons at the target arm and watching to see the seat falls properly. Reset the seat. Repeat the test to verify the latch catches properly.