Things You'll Need
Instructions
Place two pieces of the 24-inch PVC pipe into opposite ends of a T-bracket. Repeat this for two more pieces of 24-inch PVC. These two pieces you just created are the "feet" of the ladder. Place a PVC cap on all the ends of the ladder feet.
Place pieces of 18-inch PVC pipe into the remaining opening of the feet T-brackets so they are standing vertically to create the ladder "legs." Place another T-bracket on top of each of the 18-inch pieces, so the "T" is open directly above and at a right angle to the 18-inch PVC.
Place a piece of 24-inch PVC pipe horizontally in the T-brackets you just placed to connect the two legs. Place another piece of 18-inch PVC pipe in the remaining openings of the T-brackets. Add two more T-brackets to the top of these new 18-inch pipes.
Repeat Step 3 and add another ladder rung. Add the final two pieces of 18-inch PVC pipe to the vertical opening on the T-brackets. Top the final 18-inch pieces with an L-bracket, and add the last 24-inch piece in between them for the top ladder rung.
Place a golf ball in a vice. Drill through the center of the golf ball using the 1/2 inch bit. Feed each end of a piece of rope through the hole and tie a knot to secure the ball. Repeat this for all the golf balls to create a total of six bolas.