How to Build a PVC Yard Golf Game

Ladder

• 1

  Use your saw to cut a PVC pipe into six pieces, each 1-foot long. Cut another seven pieces of 2-foot long pipe.

• 2

  Put T-connectors on each end of one of your 2-foot pipes. Insert a 1-foot section of pipe in each of these T-connectors and make sure they point in the same direction. Repeat this once more to create the bottom two rungs of your ladder.

• 3

  Use a T-connector to connect two more 2-foot sections of pipe, so that the T-connector is in the center of the pipes with the open end of the T-connector facing up. Do this again to make a second piece. Add 1-foot sections to either end using elbow connectors. This is the base that will support the ladder form.

• 4

  Stand the ladder form upright and push it tightly into the T-connectors at the base.

• 5

  With the final 2 foot piece of PVC, add two elbow connectors to each end and fix them to the top of the ladder apparatus.

• 6

  Repeat Steps 1 through 5 to make another ladder.

Bolos

• 7

  Drill a hole through the centers of 8 golf balls.

• 8

  Thread nylon rope through a golf ball and tie a knot to secure the ball to the rope. Secure another golf ball of the same color onto the other end of your nylon rope. This is a bolo. The rope should be long enough to wrap around one rung of your ladder at least three times.

• 9

  Make four bolos in two colors. If you only have one color of golf ball, use a differently colored nylon rope for each team.