Hobbies And Interests
Things You'll Need
Instructions
Fold a piece of printer paper length-wise, in half.
Face the open end of the fold. Use your ruler to make a small mark 1 1/2 inches to the left of the bottom-right corner, where the paper ends meet. Make another two marks up the right end, one at 1 1/2 inches high, the other at 3 1/2 inches high. Make a dot 1 inch from the right side of the paper and directly between the marks you made at 1 1/2 and 3 1/2 inches high.
Cut out two triangles at the rear of your stealth plane with scissors: one that's formed at the bottom-right corner between the horizontal mark at 1 1/2 inch and the vertical mark at 1 1/2 inch; the other formed just above that, by the 1 1/2 and 3 1/2 inch vertical marks and the dot you drew that is 1 inch from the right edge. Open the folded halves, with the newly trimmed tail fin still to the right.
Fold the two still-unaltered corners on your left inward until they meet at the center folded line. Crease both corners when the two sides come perfectly aligned.
Fold your pointed left end, the stealth bomber's cabin area, completely over once. This will form a straight edge along the left side again.
Repeat Step 4 to make another point at the center of the left side, only one that should be approximately in proportion to your tail in a way that mirrors the stealth bomber.
Turn your plane over and fold the two halves together again along the center crease. The open folded flaps on the left should still be exposed.
Fold each wing about 1/2 inch from and parallel to the center line. Test your new stealth paper airplane by gripping the small lip formed from making the wings between your thumb and index finger.