Home >> Hobbies >> Aviation

How to Align T-Rex 600 Batteries

The T-Rex 600 Helicopter is a R/C model helicopter designed to be easy to fly while having all forms of rotary flight. When learning to fly the T-Rex 600 Helicopter, it is recommended that you have the assistance of an experienced pilot. The T-Rex 600 Helicopter uses a battery to power the motor. Do not switch the size of this battery from the recommended battery size. The additional weight will throw off the flight of the helicopter and potentially damage the motor.

Things You'll Need

Hook-and-loop tape
Hook-and-loop tape fastener

Instructions

- 1
  Slide the male connector located on the motor into the female connector on the battery.
- 2
  Place the battery on the battery plate.
- 3
  Secure loosely the battery to the battery plate by wrapping hook-and-loop tape around the battery and the battery plate.
- 4
  Move the battery along the battery plate, which is already secured to the helicopter, so the center of gravity of the helicopter is balanced. The helicopter will be level when it is lifted into the air by its main rotor blades. The position of the battery's weight will affect the balance of the helicopter.
- 5
  Tighten and secure the hoop-and-loop tape around the battery with a hook-and-loop tape fastener.

Aviation