How to Make a Goalie Stick

Place a sheet of newspaper vertically on a work surface. Fold the left side over to the right and smooth the crease. Repeat this one more time. Write ̶0;A̶1; on the sheet with a pencil.

Place another sheet of newspaper vertically on the work surface. Fold the left side over to the right, and smooth the crease down. Measure from the end closest to you to the other end of the paper.

Make a dot on the paper at the halfway mark. Measure from the dot to the end of the paper closest to you. Make an ̶0;X̶1; at the halfway mark. Cut through the paper horizontally at the ̶0;X̶1; with a scissors and dispose of the cut section closest to you in the trash. Write ̶0;B̶1; on this sheet of paper and an "A" on the other one.

Place an end of the A folded newspaper against the end of the B folded newspaper farthest from you. Tape the ends together with strips of cellophane tape.

Place a sheet of newspaper on the table vertically. Fold the left end over to the right and smooth the crease. Write ̶0;C̶1; on this sheet of newspaper.

Place an end of the C newspaper on the end of the B newspaper that is closest to you. Tape the ends together with strips of cellophane tape.

Fold the paper at the taped end to the left to form a 40-degree angle. Smooth the crease caused by the fold down with your palm.

Measure an inch up from the end of Sheet C, and make a mark on the paper with a pencil. Wrap black masking tape around the paper at the mark. Wind the black masking tape up the length of the paper until you come to the fold which meets Sheet B.