Ways to Display T-Shirts Using Wire

Hang T-Shirts Flat to Display

• Lay a T-shirt out on a flat surface. Beginning at the center of the neck opening, straighten a long section of wire around the outer edges of the T-shirt. Once you reach the neck opening, twist the beginning of the wire around the end of the wire and create a hanging hook. Place the wire structure into the T-shirt through the bottom opening and hang with the hook to display.

Wrapped Wire

• Create a Y shape structure out of wire. Bend the top of the Y to create two arms. Wrap the wire with 6-inches thick layers of newspaper. Attach Y base to a section of wood with craft glue and place the T-shirt over the structure. Adjust the top arms of the Y to the position desired.

Hanging T Display

• Cut two sections of wire, one piece measuring 12-inches and the second piece measuring 24-inches. Fold the 24-inch section in half to create two 12-inch sections. Wrap one end of the 12-inch section of wire around the center of the 24-inch section. Insert folded down 24-inch sections into the collar of the t-shirt. Bend the two halves out to create a T-shape with one end of the 24-inch wire sticking out each sleeve. Fold the top of the 12-inch section down to create a hook to hang for display.

Wire Triangle Stand

• Fold two wires to form two separate triangle sections. The triangles should each measure 8-inches across the base and stand 30-inches tall. Cut three additional sections of wire with wire cutters to 16-inches long. Place one 16-inch section at each corner of the triangle, and wrap one 6-inch section of wire around the corners to secure the triangle in place. This will create a standing structure. Place the structure on a flat surface resting along the 8-inch edges of the triangle. Place the shirt over the triangle structure, and pull tight across the front of the shirt for an attractive display.