Home >> Hobbies >> Other Hobbies

How to Use a Silver Bullet With V4l Cartomizers

The silver bullet is an e-cigarette, or personal vaporizer (VP) made by AltSmoke.com. It's tube-like design holds a rechargeable battery to give maximum life when vaping from low resistance cartomizers. Cartomizers are a combined atomizer and cartridge that holds and vaporizes the e-liquid. E-liquids, often referred to as juices, contain varying strengths of nicotine or no nicotine at all, depending on the preference of the user. Cartomizers from V4L are available as blanks for the user to fill with their preferred e-liquid, or also prefilled with liquid from V4L.

Things You'll Need

V4L cartomizer
Paperclip
E-liquid
Silver bullet

Instructions

- 1
  Remove the cartomizer from the packaging. Remove the cap from the end (a paperclip works well) to reveal the white wadding inside.
- 2
  Drip 20 drops of e-liquid into the wadding, one drop at a time. Hold the cartomizer at a 45-degree angle and drip the e-liquid against the inside wall of the cartomizer so the liquid runs down the side and soaks into the wadding. Avoid dripping the liquid directly onto the atomizer filament, which you can see in the middle of the wadding.
- 3
  Replace the plastic cap on the top of the cartomizer.
- 4
  Screw the cartomizer onto the thread on the top of the silver bullet. Do not tighten the thread excessively. The silver bullet is now ready for use.
- 5
  Press the button on the side of the body of the silver bullet at the same time as you take a draw from the e-cig by sucking on the cartomizer. The button activates the battery, which heats up the atomizer, which in turn vaporizes the e-liquid. Release the button when you have taken your puff from the device.

Other Hobbies