Things You'll Need
Instructions
Place the MarQuipt davit on the deck in a location where it be able to move freely without interfering with the hull.
Mark the locations you need to drill with the china marker; they should be the same location as the mounting holes at the base of the davit. Draw a line around the davit base with your pencil to create a visual of the general size.
Drill the holes into the deck with your drill. Place the davit base and align it with the holes you drilled. Push the mounting bolts through the holes and tighten them with the wrench.
Place the davit's boom on the mounting base and attach the block and tackle to the end of the boom.