Hobbies And Interests
Things You'll Need
Instructions
Loop the cable at the top. You can hold the loop together with a small wire cable clamp. The loop should be loose enough to fit a push pin though the middle.
Attach a weight to the bottom of your cable to hold the line steady. Try to find a weight with a hole through the center. Pull the cable through the hole and secure it with a knot or clamp on the bottom side of the weight.
Pin the photo cable to the wall with a push pin. The push pin you use should be strong enough to hold the cable and attached weight, magnets and photos. Arrange the cables with enough space between them so photos will not cover one another. You can get creative with how you line up your cables to one another.
Organize your photos the way you want them to appear on each cable. A magnet is needed for each photo you want to display.
Attach photos to the cable with the magnets. Once you have the order of how you want to display photos, start from the top of the cable and work your way to the bottom attaching each photo to the cable with the magnet. Once you have completed the first cable, you can continue onto the remaining cables until you have displayed all of your photos.