How to Make a Wall-Hanging Grandfather Clock

Cut the wood into the desired shape for your grandfather clock. Anything too heavy may be hard to keep hanging on the wall. Creating a smaller scale version of a traditional grandfather clock is one option.

Sand the pieces of the clock. Follow the directions for your sander model, which will tell you what grain of sandpaper to use. Sand all the surfaces of the clock, which will result in a even look when the clock is finished.

Stain the pieces of the grandfather clock. Many colors of stain are available, including wood finishes and colors, allowing you to match your grandfather clock with the decor of the room in which it will hang. Follow the directions on the can of stain regarding what to spread it with and how long to let it dry between coats.

Assemble the clock face. The pieces are available separately or in complete kits. Follow the directions for the one you choose, which typically involves placing the hands, mounting the battery case and covering the face with a piece of glass.

Put the clock together. Use wood glue or screws to put the wooden parts of the clock together. Place the face of the clock where it belongs. If you are using wood glue, be sure to allow it to dry completely before hanging to prevent pieces from slipping or falling off. Put a battery in the clock and be sure it works properly before hanging as well.

Attach the wall-hanging hardware. These are available in kits with instructions as well. Choosing a sturdy option ensures that your clock gets enough support to prevent it from falling off the wall and breaking. Most kits include wire and screws. An alternate option is to drill a hole in the back of the grandfather clock and hang it on a thick, heavy nail.