Things You'll Need
Instructions
Lay a 25 inch by 48 inch sheet of plywood flat and set a 25-inch board on top of it. Position the board so it is parallel with the 25-inch edges and 16 inches away from one of the 25-inch edges. Screw through the plywood using four screws spaced 6 inches apart to secure this board in this position. This is one side to your booth. Repeat this step to build the other side.
Position your sides upright and parallel so they are standing on their 25-inch edges. The 25-inch boards are 16 inches away from the top 25-inch edges of the sides and between the plywood sheets. Position two 25-inch boards between the sides so they are each flush with the same pair of 48-inch edges the top and bottom corners. There is one board at the top and one at the bottom. These are supports for the booth and this is the back of your stand. Screw through the sides and into the boards using four screws for each board.
Position the 26 inch by 48 inch plywood against the back of the booth so the corners are flush. Screw through the plywood and into the two 25-inch boards it is flat against. Use four screws for each board.
Set the 25 inch by 25 inch sheet on top of the 25-inch boards that are 16 inches away from the top edges of the booth so the edges are flush. Screw through the plywood and into the boards using four screws for each board.