Home >> Hobbies >> Other Hobbies

How to Put Together a TSD M700 Sniper Rifle

The TSD M700 is a sniper air rifle modeled after the M40 sniper rifle. Like any weapon, proper maintenance is crucial if you want it to last long and perform at its peak potential. This means regular cleaning and oiling of the weapon is a must. Doing so will require you to disassemble the unit. The good news is that this weapon is designed to be disassembled quickly.

Things You'll Need

Phillips screwdriver

Instructions

- 1
  Lay the components of the Airsoft rifle out in front of you. You should have the body of the weapon, the pellet cartridge, the firing bolt, top screws, rail mount and optical scope.
- 2
  Slide the bolt into the circular port just behind the barrel so the rear of the bolt is sticking out of the port.
- 3
  Fit the rail mount over the top of the barrel where the bolt is located and align it so the screw holes match up with the holes on the body of the weapon.
- 4
  Use your Phillips screwdriver to screw in the screws on the top of the rail mount.
- 5
  Fit the scope over the mount so that the base of the scope is over the top of the mount. Slide the scope back to lock it into place on the top of the weapon.
- 6
  Insert a magazine into the slot on the grip just below the barrel. Ensure that the magazine is inserted open-end first. Push the magazine into the slot until it locks in place.

Other Hobbies