Hobbies And Interests
Things You'll Need
Instructions
Place the four PVC pipe elbow joints on a work surface with one side facing up. Arrange the joints against each other so that the joint to the left and closest to you has its hole facing left. Arrange the joint to your left and farthest from you so that the hole is also facing to the left.
Adjust the joint to your right and closest to you so that the hole is facing to the right. Adjust the joint to your right and farthest form you so that the hole is also facing to the right.
Apply bonding glue to the right sides of the two joints to your left. Press the sides of the two joints to your right against the two joints to your left. Hold the four joints against each other for two minutes. Apply bonding glue around the sides of the joints where the seams of all four joints meet. Let the glue set overnight.
Apply bonding glue to the holes of the joints that are facing up. Place plywood square on top of the joints. Press the plywood square again the holes at the top of the joints for two minutes. Let the glue set overnight.
Turn the plywood square over. Remove the backing paper from the side of the four gliding pads. Place the adhesive side of each pad that is now exposed against the bottom of each of the joints. Press each pad against a joint for one minute.
Turn the dolly you have made over. Place a video camcorder on the dolly. Lay down behind he camcorder so that you can push the dolly forward as you look through the camcorders viewfinder or at its LCD viewing screen.