Okuma Impact LU-15 Specs

Dimensions, Power and Accessories

• The Impact LU-15 has a length of 156 inches, a width of 83 inches and a height of 76 inches. Its net weight is about 11,660 lbs. and it requires a power of 39 kilovolt amperes (KVAs) at 220 volts. It also comes standard with a chip conveyor (an add-on that automatically removes chips of material from the machine's bed), a programmable tailstock and a coolant tank.

Control Panel

• The Impact LU-15 comes standard with an Okuma OSP 7000L control panel. This particular control panel has a 12.1-inch thin-film transistor (TFT), LCD screen. Like any other CNC control panel, the OSP 7000L comes with an On/Off switch, a reset button, manual controls and options to modify the speed and feed rate of the machine. Buttons to manipulate the depth of the X and Z axis are also included.

X and Z Travel, Spindle and Turret Specs

• The X Axis travel of the Impact LU-15 comes at 10.24 inches, while its Z axis travel comes at 25.20 inches. The machine's spindle speed ranges from 65 rpm up to 3,500 rpm, while the spindle motor is capable of producing 30 hp to 40 hp. The standard spindle-hole diameter is 3.94 inches. The upper turret can be placed into 12 positions, while its lower turret can be placed into 10 positions.

Swing Over Specs

• The Impact LU-15 comes with a swing over bed of 20.9 inches, which means that the largest piece of material that the spindle can manipulate without the material hitting the bed is about this size. Its swing over carriage is about 15 inches, while its swing over cross slide is about 13 inches. The machine's maximum turning diameter is about 10.63 inches, while its center distance is about 23.6 inches.