Home >> Hobbies >> Other Hobbies

How to Install Esky King V2 Brushless Motors

Brushless motors are offer more power and better durability than their brushed counterparts. These compact devices are growing in popularity among radio-controlled (RC) vehicle enthusiasts because of their exceptional strength and reduced need for maintenance. Learn how to install your brushless motor to ensure optimum performance from your RC helicopter.

Things You'll Need

Helicopter chassis
Brushless motor
Pinion gear
Snub screw
Hex wrench
Motor mounting bracket
Screwdriver
6 Screws
4 Washers
Electronic Speed Control (ESC)

Instructions

- 1
  Insert the pinion gear over the motor's main shaft, then fasten it in position by tightening the snub screw and the hex wrench.
- 2
  Slide the motor shaft down through the motor mounting bracket, then secure it with two screws. Insert the motor and bracket into the helicopter chassis, then fasten it with four screws and four washers (two on either side).
- 3
  Connect the three motor wires to the electronic speed control (ESC).

Other Hobbies