Home >> Hobbies >> Other Hobbies

How to Airbrush Leather Jackets

Airbrushing leather can be a waste of time unless the proper materials are used. Paint has a tough time sticking to the leather jackets and will peel off not too long after it is applied. However, if an adhesion promoter is used in combination with a matte finish, the paint will be sealed and secure. The airbrushed design can last a long time on the leather jacket if it is applied correctly.

Things You'll Need

Rubbing alcohol
Cotton ball
Adhesion promoter spray
Airbrush gun
Paint
Matte finish spray
Leather Wipes

Instructions

- 1
  Apply rubbing alcohol to the area of leather that will be painted. Use a cotton ball to apply the alcohol.
- 2
  Spray a light coat of adhesion promoter on the area that will be painted. Let the adhesion promoter dry for 20 minutes.
- 3
  Use the airbrush gun and paint to decorate the jacket. Let the paint dry completely.
- 4
  Spray a very light coating of matte finish over the dried paint and let the matte finish dry for 24 hours.
- 5
  Condition the painted leather with a leather wipe to preserve the natural texture of the jacket.

Other Hobbies