Home >> Hobbies >> Other Hobbies

How to Set a Unimax Green Laser to Constant Beam

The Lasermax-brand Unimax green laser sight attaches to a replica handgun to provide a targeting sight for better aim. You can set the laser beam emitted from the laser sight to a "continuous" mode that will keep the laser turned on rather than having it pulse on and off. The procedure is documented in the instruction manual that comes with the laser sight and will not harm the laser in any way.

Instructions

- 1
  Place the Unimax laser sight on a table in front of you, with the activation switch facing up. Move the activation switch at the top of the module to the center position.
- 2
  Move the activation switch to the left until it clicks into position. Rotate the laser sight so that the front is facing away from you and at a far wall.
- 3
  Press in on the side button to turn the laser on. Release the button to see that the beam of laser light continues to shine on the wall. Move the activation switch back to the center to turn the laser beam off.

Other Hobbies