Home >> Hobbies >> Other Hobbies

How to Set up a Team Losi Mini-LST2 ESC

The Losi Mini-LST2 is a 1/8-scale, ready-to-run, remote-controlled monster truck that features dual 370-size electric motors, an aluminum chassis, four-wheel drive system, 2.4 Ghz radio system and oil-filled shocks. The truck also has a 7.2-volt battery and electronic speed control. Setting up the electronic speed control may prove necessary if you're experiencing issues with the vehicle or after replacing the original radio system components.

Instructions

- 1
  Remove the clips that secure the body to the vehicle. Remove the body and set it to the side.
- 2
  Charge and install the vehicle's battery pack if necessary.
- 3
  Set the "TH" and "ST" trim controls on the transmitter to the neutral position.
- 4
  Turn on the transmitter. Flip the "ESC" switch, located directly behind the square-shaped speed control.
- 5
  Hit the small rectangular "Setup" button.
- 6
  Squeeze the throttle trigger on the transmitter to full throttle, then hit "Setup" and wait for the green LED to display.
- 7
  Push the throttle trigger to the full reverse position and press the "Setup" button. After the red LED illuminates, release the throttle trigger and hit the "Setup" button to complete the setup process.

Other Hobbies