Things You'll Need
Instructions
Take one of the 8-foot spans of ½-inch PVC piping and attach a "T" connector at the both ends. Attach an "L" connector into the other top opening of the "T" connectors. The 8-foot span will be the back of the photo booth. The "L" connectors should be pointing forward.
Insert one 6-foot span of ½-inch PVC piping into each of the "L" connectors. The three pieces of PVC piping should form a "U" shape.
Insert an "L" connector at the end of the two 6-foot PVC pipes. Point the open part of the connector point toward the floor.
Insert two of the 7-foot spans of ½-PVC piping into the bottom opening of the "L" connectors, and the other two 7-foot spans into the bottom opening of "T" connectors. These will form the legs for the photo-booth backdrop stand.
Attach a "T" connector to the bottom of each of the legs. Insert one of 12-inch spans of the PVC piping into each of the bottom "T" openings. These spans will form the base for the stand.
Attach the fabric to the top spans with a clamp or duct tape. Black fabric is a frequent choice, but any color will work.
Position a stool or bench 2 feet in front of the rear portion of the backdrop. Place the digital camera on a tripod and position the tripod approximately 4 feet in front the stool. Turn the camera on, set it to "Automatic" and begin taking pictures.