How to Replace Book Binding Glue

Clear a workspace for yourself that is free of dust and debris.

Take the original spine off the book by separating the book from the spine with a utility knife.

Prepare the new book spine by choosing a premade book cloth or by cutting a piece of cloth that measures 1.5 inch longer than the length of the book and 4.5 inches wider than the book's width.

Cut a piece of cardboard to measure the same width as the spine or side of the book.

Take the cardboard and glue the cardboard in the middle of the cloth of the book.

Cut the book cloth on both ends so you can fold it over the cardboard and glue in place. This will be the new spine of the book.

Remove the old glue from the spine of the book by gently chipping away at the glue with a utility knife. Try not to damage the book during this process.

Place the book down with the spine edge facing up towards the ceiling and use two bricks or bookstands to secure it.

Glue spine liner paper to the book and avoid air pockets and large amounts of glue.

Wrap the book cloth around the cover.

Take a piece of waxed paper and put inside the front cover to prevent the pages from sticking together.

Place the finished book into a book press or put it in a corner against the wall overnight to dry.