Hobbies And Interests
Things You'll Need
Instructions
Wash the sari and backing fabric per manufacturer instructions. Allow it to dry completely. Most saris must be air dried, line dried or dried flat. The backing fabric may be tossed in the dryer per manufacturer's instructions.
Plot the layout and size of your finished quilt. Take into account any stains, tear or excessive wear that is visible in the sari fabric. Making a smaller quilt provides the opportunity to cut away any unsightly areas and use them for filler instead of on the visual portions of the quilt.
Cut away any parts of the sari that you do not want showing on your finished quilt.
Measure the size of the sari fabric you are using after making all cuts if you are using one large piece. Sew all of the patchwork pieces together in the order you have laid out. Measure the size of the finished patchwork piece. For a patchwork style quilt, you can also base your measurements off the finished quilt size that you will need. For example, if you are covering a queen sized bed and using multiple saris for the patchwork design; your finished size will need to be 86 inches-by-86 inches.
Cut a piece of backing fabric to the same size as the cut sari fabric or finished quilt.
Layer the backing fabric, with the right side facing down on the work surface, then the quilt batting or filler, followed by the sari. Place the sari, or patchwork, fabric right side up. The right side is the side of the sari you want showing on the finished quilt.
Pin the three pieces together in multiple places across the project to hold it all together and prevent shifting while you are sewing.
Thread the sewing machine with the coordinating thread and attach the darning foot, sometimes called a free motion quilting foot of embroidery foot.
Place the quilt under the needle and lower the presser foot. Begin sewing in any pattern you choose to permanently sew the layers together. Remove the pins as you encounter them, before they are pulled under the needle. If the needle comes in contact with a pin it could cause personal injury or damage the project.
Stitch the quilt binding or bias tape around all four edges of the quilt to cover all the raw edges. Miter the corners as you come to them and tuck under the end of the tape when reaching the end. Back stitch at the beginning and the end of the stitch for stability.