Things You'll Need
Instructions
Measure a strip from the denim fabric that is 1 yard long and 4 inches wide. Mark the measurements onto the fabric with a disappearing ink pen and then cut out the fabric strip.
Place the fabric right side down on an iron-safe surface and fold the edges inward by 1/8 inch. Press the fold with the iron.
Fold the strip in half, lengthwise, so you have a 1 yard long, 1 3/4-inch thick strip. Press the fold into the strip and place a pin every 6 inches to better hold it in place.
Sew the strip's edges closed all the way around with a straight stitch.
Fold one end of the rope down 4 inches and pin it in place.
Stitch the loop into place with a 1-inch straight stitch box, placing an "X" in the box for extra reinforcement.
Cut out three 12-inch long strips that are 3 inches wide. Fold, press and stitch the edges the same as you did for the rope.
Position the strips along the rope in a figure-8 pattern so that you have one loop on each side of the rope. Pin the strips in place.
Secure each loop with a box stitch placed where the rope and loops meet.