Things You'll Need
Instructions
Measure around the hem of the tablecloth. Add 1 inch to this measurement.
Cut a piece of trim to this length. If you are unsure of your measurement, cut the trim several inches longer, and cut off the excess after you finish pinning on the trim.
Pin the trim around the edge of the tablecloth. When you reach the end, fold under 1 inch of the trim to create a finished end. Cut off any excess trim.
Sew the trim to the tablecloth with a straight machine stitch. Sew near the top and bottom edges of flat trim or ribbon. Sew down the middle of rickrack. Sew fringe along the flat band at the top of the fringe. If the band is more than 1/2-inch wide, sew along the top and the bottom of the band.