Things You'll Need
Instructions
How to Fold and Sew a Hem
Place the fabric right side down.
Fold the edge of the fabric over toward the wrong side. Make the width of the fold the measurement you’ve chosen, and make sure the width of the fold is consistent for the entire hem.
Pin the fold in place if you’re making a large hem or using slippery fabric.
Press the fabric along the fold (removing any pins just before you iron that section). Press firmly to hold the fabric in place.
Fold the edge of the fabric over again, using the measurement you’ve chosen.
Pin the new fold if necessary, then press the fabric along the fold.
To sew the hem by machine, stitch along the folded fabric, about 1/4 inch from the top edge, using a straight stitch or a decorative stitch. Some machines also have a hem stitch setting that minimizes how much the stitches show.
To sew the hem by hand, thread the needle and tie a knot in the end of the thread. Whipstitch the top edge of the fold to the fabric, taking care to only poke the needle through the tiniest amount of outside fabric to prevent the stitches from showing.