Hobbies And Interests

Moultrie Feeder Game Cam Instructions

Game cameras capture still photos and videos of wildlife automatically so you do not need to be in the area to alert the animals. Photos of wildlife in their natural habitat without stress capture the animal's interaction with each other naturally. After following the set-up instructions on your Moultrie Feeder Game Cam and securing videos and still photos, you can view your work on your computer by downloading the information with an universal serial bus (USB) cord.

Instructions

    • 1

      Slide the "On/Off/Aim" button to "On." Press the "Mode" button once. The camera setup menu appears on the screen.

    • 2

      Use the up and down arrows to highlight "Setup Date/Time" and press "OK" to select this function. Press the up and down arrows to choose the month and "OK" to set it. Press the right button to move to the day. Select the date with the up and down arrows and press "OK". Set the year next in this same manner.

    • 3

      Use the up and down arrows and "OK" key to set the time and AM or PM.

    • 4

      Press the down arrow to obtain the "Capture Mode" screen. Press the up and down arrows to highlight the mode. Choose from trail cam, plot cam, hybrid cam or video. Press "OK" when the mode you desire is highlighted. Trail cam mode takes still photos when an animal is detected. Plot cam takes a 30 minute morning video 30 minutes before sunrise and another 30 minutes after sunset. Hybrid cam operates in the trail cam mode during the night and the plot cam mode in the daytime.

    • 5

      Press the down arrow to highlight the "Photo Quality" menu. Press the up and down arrows to highlight low, medium, high or enhanced and press "OK" to store the setting.

    • 6

      Press the down arrow to arrive on the "Photo Delay" menu. Choose 15 or 30 seconds or 1, 5, 30 or 60 seconds and press "OK."

    • 7

      Press the down arrow for the "Multi Shot" menu. Choose 1, 2 or 3 shots with a 4-second delay between each and press "OK."

    • 8

      Press the down arrow for the "Video Resolution" screen and choose high or low. Press "OK" to store your setting.

    • 9

      Press the down area and set the video length of 5, 15 or 30 seconds in the same manner as storing setting on previous screens.

    • 10

      Slide the slider button to "On." Thread the included mounting strap through the holes on the sides of the camera. Tie the camera around a tree pointing at a trail or area you think wildlife is most likely to appear.

    • 11

      Install the Plotstalker CD into your computer and follow the on-screen directions to view your photos and videos on your computer.


https://www.htfbw.com © Hobbies And Interests