How to Build a Mason Bee House

Building a Mason Bee House

• 1

  Drill several holes 3 to 5 inches deep into the wood using a 5/16-inch drill bit. Choose wood that is thick enough that you will not break all the way through to the other side. Untreated 4x4 woods are sufficiently thick enough.

• 2

  Use screws to secure chicken wire over the holes to prevent birds and larger bees from gaining access. Make sure the chicken wire will allow entry for a bee that is larger than 1/4-inch in diameter. Pushing the chicken wire into the shape of a bubble with side access is a good way to keep the holes out of a beak's reach.

• 3

  Screw the piece of wood to the place where the mason bees will live, making sure the hole will be accessible to the bees. The best spots are places you have seen the bees before and that are preferably sheltered from rain and receive morning sunlight. Mason bees begin nesting in March, so this is the best time of year to put up the house. The best places are the south sides of fence posts, buildings or trees.

• 4

  Relocate mason bees in the spring. Put up some of these houses in March in places you have seen the bees before. In September to November, remove and relocate the houses. By this time the mason bee larvae will have grown into bees and will be resting in their silk cocoons until the spring. Make sure to carry, and leave the house upright.

• 5

  Cover the mason bee houses in November to protect them from the elements. Leave them in a dry and unheated place. If you have protected the houses from the snow and rain all winter, the mason bees should emerge in March or April of the next year.