How to Slice Petrified Wood Into Slabs

Obtain a piece of petrified wood that you would like to slice into slabs. Select a piece that is not quite as thick as the exposed radius of the blade of your wet saw. You may have to obtain a wet saw with a larger blade radius to cut larger pieces of petrified wood.

Be certain that your wet saw has sufficient water flow to keep your work lubricated while you are cutting your petrified wood into slabs. Follow the directions and safety recommendations in the instruction manual for your wet saw.

Use a fence guide for your wet saw to keep the thickness of the slabs you are slicing uniform. Set the fence guide to the desired thickness of your slabs. If your wet saw does not have a fence guide, you can make one with a short piece of scrap lumber and a pair of clamps; or you can do your slicing "by eye" and hope for uniform thickness in your slices.

Apply firm and uniform pressure to the rock as you pass it through the blade of the wet saw. Set your slices aside as you continue slicing through the remainder of your piece of petrified wood.

Wash your finished slices of petrified wood in soapy water and rinse with clean water. You can polish your rock slices by ordinary lapidary processes later. Use your fingertips to rub in a spot of liquid dish soap onto the flat smooth surfaces of your petrified wood slabs to bring out the sparkle of the minerals and the detail of the wood until you are ready to permanently polish them later on.