How to Polish Rocks & Gems Without a Rock Tumbler

Polishing Stones and Gems

• 1

  Clean the stones and gems. Fill a bucket with hot, soapy water and clean away all the dirt and residue from the rocks. Use an old toothbrush to get into any crevices and to remove stubborn bits of dirt or grime.

• 2

  Use your dremel tool and begin grinding the stones and gems into shape. Make sure you are wearing protective eye wear and gloves for this. Grind down sharp edges and crevices to help make sanding the stones and gems a little easier.

• 3

  Sand the stones and gems for shaping. Begin with a coarse grain of sandpaper, and moisten the paper with water. Begin sanding until most of the rough edges begin to become smooth and rounded or until you see the desired shape of the rock. Be discriminating with your grain of sandpaper, as some stones and gems are softer than others. You may find that softer gems or stones do not require the coarsest grain of sandpaper.

• 4

  Sand the stones and gems for polish. Begin with a medium grain sandpaper, and sand the rock down to both its desired shape and smoothness. As you see your desired results, use lighter grain sandpaper, finishing with ultra-fine grain.

• 5

  Apply the finishing polish to the stones and gems. Using a heavy fabric such as denim, polish the rocks until they begin to shine or show luster. At this point, you may choose to either continue polishing with the cloth, or you may coat the stones and gems with mineral oil or commercial rock polish. Allow them to dry.