How to Extract Magnetite

Locate places where magnetite might be found by reviewing geological survey maps for spots you'd like to mine.

Search for rocks that are often found with magnetite. These include diabase, gabbro, gneiss, quartzite and sandstone.

Obtain the proper mining permits and licenses by contacting your local government to inquire about existing mining requirements.

Search the area you wish to mine with a magnetometer to determine the orientation, shape and depth of the magnetic deposit.

Move the magnetometer probe in a straight line slowly over the area to record the reading. Move the instrument closer and the magnetic field reading increases in strength. Hold the probe in place until the reading stabilizes.

Walk along the area with a compass or metal detector if you do not have a magnetometer. Watch the compass needle deflect to indicate that you're walking over mineralized rocks. A metal detector can detect them as well.

Remove the soil and rock above the mineral deposit with a shovel and extract the magnetite with a pointed-tip rock hammer. Crack open the rock deposit with the square head of the rock hammer and dig the mineral samples out of the hard rock with the pointed tip.

Extract the magnetite from river and beach sand by using a large magnet to pull magnetite particles from the sand. Run a smaller magnet over the pile to remove any remaining sand and debris. Repeat until the magnetite is free of residue.