How to Extract Gold From Quartz

While wearing safety glasses, break up the rocks with your hammer to separate the gold. As you go, put the isolated pieces of gold into your container. Pieces that contain both quartz and gold should be crushed into pieces smaller than 1 inch. Place your rocks on a smooth, solid surface. Place your cloth over your rock specimens to prevent lose debris from scattering.

Place the smaller pieces into the mortar; pound the rocks with the pestle until you break up the rocks into grains. Your samples need to be crushed into pieces small enough to run through the sieve. As you proceed, pick out the separate pieces of gold.

Run the material through the sieve. Return particles that do not go through the sieve back to the mortar and pestle and Grind them until they fit through the sieve.

Place all the powder that fit through the sieve into your gold pan. Use the gold panning method to separate the quartz and gold. Submerge the gold pan under water and rotate it. Lift the pan out of water while continuing to spin. Repeat this process until the material in the pan is gone.

Due to their density, gold flakes and nuggets will collect around the lower ridge of the gold pan. Remove the gold and place into your container.