Home >> Science & Nature >> Science

How to Build a Homemade Radiometer

Sir William Crookes developed the radiometer in 1873 when he was studying infrared radiation. He believed that the reason the vanes in the radiometer turned was because of pressure from light on the shiny surfaces. Various other theories were developed to explain the movement of the vanes, but the correct answer was first provided by Osborne Reynolds in 1987. The temperature difference on the two sides of the vanes stimulates gas to move from the cold side to the warm side. Molecules move faster on the warmer side, and those striking the edges of the vane push it toward the cooler side, causing the gas on the cooler side to move toward the warmer side.

Things You'll Need

Silver gum wrapper
Black marking pen
Scissors
Wooden matchstick with 4 sides
Super glue
Toothpick
Thread
Pencil
Glass jar

Instructions

- 1
  Color the paper side of a silver gum wrapper black, using a marking pen. Let it dry briefly, then cut it into four pieces. Smooth out the four pieces as flat and wrinkle-free as you can.
- 2
  Put a dot of super glue on one side of the match and spread it with a tooth pick. Attach the edge of one piece of gum wrapper to that side, so that it sticks out like a flag. Attach the remaining pieces of gum wrapper to the remaining sides of the match, with the shiny sides all facing in the same direction.
- 3
  Tie a thread to the bottom end of the match. Tie the other end of the thread to a pencil, about 2 inches from the match.
- 4
  Balance the pencil on the jar, with the match and its four flags hanging down inside the jar, not touching the bottom. The straighter the match and the little flags hang, the better. Place the jar in a sunny, hot location or near a hot light source.

Science