Home >> Toys >> Action Figures

How to Make a Toy WWE Entrance Ramp

The WWE entrance stage is used to introduce wrestlers as they head to the ring. Often, the wrestling action from inside the ring heads up the entrance ramp, where the wrestlers engage each other. Creating your own toy entrance ramp is an easy task that will provide your wrestlers an extra play area. The ramp is compatible with WWE Mattel action figures or similar-sized wrestling figures.

Things You'll Need

Empty DVD case
2 small matchboxes
White glue
Silver duct tape
6 craft sticks
Wood glue
Washcloth
Scissors

Instructions

- 1
  Wrap the DVD case in a layer of silver duct tape. This will create the appearance of the steel grate used on a WWE entrance ramp.
- 2
  
  Use a small matchbox to hold the ramp up.
  
  Angle the DVD case to create the ramp. Dab a little white glue on the top of the matchboxes, and slide them under the top angle of the DVD case to create the base of the ramp. Apply pressure so the glue holds.
- 3
  Apply duct tape to the matchboxes to match the rest of the ramp and secure it better to hold the weight of the action figures.
- 4
  Glue two craft sticks together to make three sets of double craft sticks. Press the sticks together so they match evenly and hold in place.
- 5
  Form a horseshoe pattern with the three sets of craft sticks. Glue the ends of each stick, and hold them together.
- 6
  Duct tape the horseshoe pattern upside down to the back of the ramp base. Use two small strips of tape on each section to secure it. This will create the entrance area for the figures and will have a large opening.
- 7
  Cut washcloth into two equal sized pieces. Glue each piece to the front section of the craft sticks to create the entrance curtains for the figures. Use a red washcloth for WWE Raw, a blue washcloth for WWE Smackdown or any color for a general color.
- 8
  Let all of the glue dry before you use your WWE figures with the ramp.

Action Figures