Star Wars Republic Gunship Instructions

Assembling the Gunship

• 1

  Snap the two cargo doors into the side of the body. The two pieces should snap into place at the back of the hull.

• 2

  Push the canopy down over the two cockpit seats. It should click into place.

• 3

  Take the deployment platform and click it into place at the bottom of the vehicle.

• 4

  Attach the two wings at the top of the vehicle; they will snap into place at the top and point downward at about a 30-degree angle.

• 5

  Connect the cannons at the top of the vehicle, atop the outside corners of the wings.

• 6

  Flip the model over. Push the under-wing bombs onto the pegs beneath the wing to store them.

• 7

  Push the button at the top of the model (which is now on the table) to push the doors outward slightly. Attach the door bombs to the bottoms of the door.

• 8

  Flip the model back over and point the tail toward you. Tie a piece of string to one of the grappling hooks and attach the other end to the back of the model. Repeat with the other grappling hook.

• 9

  Plug the tail gun into the back of the model.

Using the Gunship

• 10

  Press the button at the top to open the side doors. This lets you load personnel and cargo into the gunship.

• 11

  Land the vehicle on the battlefield. Pull the latch at the top of the vehicle to release the deployment platform. Lift the model straight up to leave the troops and platform behind.

• 12

  Rotate the wing ball turrets to aim at incoming foes.

• 13

  Load rail gun projectiles into the nose and main cannons.

• 14

  Push the buttons on the cannons and nose guns to fire the spring-loaded projectiles.