Home >> Toys >> Action Figures

How to Make a WWE Stage for Action Figures

Do not bother wasting money on a store-bought WWE stage for your or your kid's action figures -- it is simple and cheap to build one yourself. The action figures are no more than a couple of inches tall so the stage does not have to be big. It can be made from a variety of cheap materials, although cardboard is probably the most accessible. Or, if your action figures will be wrestling on stage, you might want to use a sturdier material, like plastic.

Things You'll Need

Box made of cardboard or other material
Blue cardboard, 3-by-5 inches
Strong glue
Black and silver paint
Masking tape

Instructions

- 1
  Turn the box upside down so the bottom side is on top. Paint the top of the box black and the sides silver. This is the initial stage piece.
- 2
  Cut a door in the middle bottom of the piece of cardboard that is tall and wide enough for your biggest action figure to go through. This is the entrance part of the stage. Tape and glue the entrance to the back of the stage.
- 3
  Draw or print out two WWE logos and glue one of them to the spot above the entrance door. Glue the other logo to the center of the stage.
- 4
  Take another piece of cardboard and create a small ramp that can stand in front of the stage. To make the ramp cut two right-angle triangles out of cardboard. Cut a long rectangular piece of cardboard no more than 2 inches wide. Tape the triangular sides to the rectangular ramp. Paint the ramp black. The ramp does not have to be connected to the stage.

Action Figures