The Instructions for the Transformers Crossover Wolverine

Flip up the tires from the truck bed of a Transformers Crossover Wolverine action figure.

Pull the tabs beneath the cab doors outward to release the truck bed.

Flip down the truck bed perpendicular to the cab to form the leg assembly.

Flip up the two yellow tabs behind both cab windows.

Rotate the leg assembly 180 degrees so the truck bed faces the same direction as the vehicle's headlights.

Press the cab down into the leg assembly to secure it in place.

Rotate the leg assembly back 180 degrees to its original position and flip down the two black tabs at the bottom of the yellow part of the legs.

Rotate the truck bed forward to form the lower legs of the figure and press the bed against the yellow portion of the legs to lock it in place.

Flip out the black tabs on the opposite end of the truck bed to form the figure's feet.

Fold both the rear tires inward so they rest against the back of the figure's legs.

Flip out the blue and yellow tabs just below the cab's side mirrors.

Rotate the side doors backward and flip them out to form the figure's arms.

Press the front tires inward to make room for the figure's arms.

Flip up both the front headlights and rotate the arms forward to the grill of the vehicle.

Fold down the blue and yellow tabs from just below the cab's side mirrors to secure the arms in place.

Lower the vehicle's grill to make room for the figure's head.

Fold in the two yellow tabs beneath the roof of the cab.

Flip down the roof of the cab and rotate the two tires from the truck bed 180 degrees to form the figure's back.

Flip up the panel just behind the grill and push the head back until it clicks in place.

Press the blue buttons just behind the wrists to extend the figure's Wolverine claws.