Instructions
Place the rolled-up slide onto the ground. Gently unroll it on a flat surface with no debris or objects underneath. The surface should also be dry. Do not unroll it on a hard surface such as concrete as this could be harmful to children playing on it or damage the toy.
Connect the long inlet coming from the back of the slide to the opening on the back of the blower unit and tie it down using the ties on the side of the inlet. Insert the provided stakes through the holes on the corners of the blower and drive them into the ground to secure it in place.
Connect the power cord from the blower to an open wall outlet. Ensure that the blower and the cord are not wet before you do this. Once the blower is plugged in, press the "On" button on the blower. It will begin to inflate the slide. Leave the blower on, even after the slide is inflated.
Insert the provided stakes through the loops on the corners of the slide and drive them into the ground to keep the slide stationary while it is in use. Connect a garden hose to an outdoor spout and connect the other end to the inlet of the sprayer assembly. Turn on the valve to allow water to flow to the slide.