Home >> Toys >> Backyard Toys

How to Hang Children's Tree Swings Without Climbing Trees

A swing can offer a family plenty of enjoyment and make swinging a child's favorite backyard activity. Setting up a swing attached to a tree branch can be a more affordable way to provide a swing without your having to purchase an entire swing set, but the key is making sure that the setup is safe. The ropes must be durable, and the branch strong. You can hang a swing or tire from a tree without climbing it, so long as you test the setup before allowing your child to swing.

Things You'll Need

Rope rated at 350 lbs. or heavier
2 steel loops
Swing seat or tire

Instructions

- 1
  Cut two lengths of rope. The length of each should be twice that of the swing to the branch.
- 2
  Tie each rope to one steel loop.
- 3
  Throw one rope over the selected branch, and with the other end of the rope in hand, pull the steel loop back to you.
- 4
  Run the end of the rope through the steel loop and pull until the steel loop is tight against the tree branch.
- 5
  Repeat steps 2 and 3 with the other rope.
- 6
  Tie your swing to the ropes with strong knots that will not slip and adjust for length. The swing should sit evenly horizontally, from side to side.
- 7
  Test the strength and durability of the knots and branch before allowing your child or anyone else to swing --- and be sure the swing is not going to hit anything. Adjust knots or location if needed. When you are comfortable with your setup, you can invite friends and family to enjoy your new swing.

Backyard Toys