Little Tikes Playhouse Instructions

Tools and pieces

• These instructions are for the Cozy Cottage Playhouse. They also cover the basics for more elaborate models that have more bells and whistles. By looking at the extras (faucets, oven burners) and the bulk pieces, you can figure out how to attach the extras for the more elaborate models.

  To construct the playhouse, you will need a hammer, Phillips-head screwdriver, drill, block of wood, and protective eyewear.

  The Cozy Cottage contains 16 1 1/2-inch plastic screws, 6 1-inch plastic screws, 14 dark-colored screw caps, 8 light-colored screw caps, a tube that looks like it could double as Luke Skywalker's light saber, a floor threshold with notched openings at both ends, a faucet, left and right kitchen playhouse pieces, left and right living room playhouse pieces, two roof pieces, two tables pieces (one with food), a gate door, and a doghouse piece.

The roof

• Make starter holes by placing the 1 1/2-inch screws in roof holes (2 holes on each roof piece) and hit with hammer. (Eyewear should always be used when using a hammer.) Put the two roof pieces together with one person holding the pieces together and one using 1 1/2-inch screws and dark-colored screw covers. Put screws in one side of roof and then rotate roof and do the other side.

Gate door

• Holding the right living room piece on its side so there is a tunnel opening between the two sides of the piece, line the gate door up with its spot which will be on top of tilted living room piece (on right side when looking at the outside of the piece).

  Push the door into place.
  Lock piece into place using block of wood and hammer. Hit piece where it fits into living room piece.

Living room

• Standing right living room piece up properly, push left living room piece into right piece at top and bottom. Install 1-inch screws into pole on left side of left living room piece.

  Put table through living room window and put in place by pushing down on table.

  Screw table into place into base of living room pieces by using 1 1/2-inch screw and a light-colored screw cover.

Kitchen

• Put the left and right kitchen pieces together by pushing together at top and near bottom. Install 1" screws with light-colored screw covers.

  Put the kitchen table (with food on it) through the window, pushing table into place on kitchen pieces.

  Screw table into place onto kitchen pieces with a light-colored screw cap covering it.

More exterior work

• Put the doghouse piece (with doghouse facing outward) in place by snapping it into place on kitchen piece.

  Snap the other end of doghouse piece into living room piece. The kitchen and living room pieces should be connected. Put 1" screws in place with light-colored cover in upper left and right portions of the doghouse piece.

Finishing exterior

• Put the floor threshold in place under the gate door.

  Put the left living room piece into slot in floor threshold.

  Put the roof in place. Install the four 1 1/2-inch screws with covers where the two roof halves meet. Then install remaining 4 screws.

Finishing touches

• Install faucet into kitchen table piece in window.

  Place porch light stickers on both side of front door. Place postman sticker over mail slot.

  Place dog sticker in doghouse slot. Put clock sticker in grandfather clock. Place muffin sticker in microwave window. Place microwave buttons to right of muffin sticker. Place oven controls over conventional oven. Place turkey sticker in oven window spot.

  Place burner stickers on circles next to sink. Place triangle burners/food sticker next to circular burners.