How to Disassemble a Hasbro Light Saber

Unscrew the bottom cap by hand and slide the batteries out of the light saber.

Slip a flathead screwdriver under the panel with the power button on it. Slide the panel off with a gentle upwards motion with the flathead screwdriver.

Unscrew the Philips headed screws that were under the button panel. Pull the button assembly out by hand. The assembly will be connected by two wires.

Push the blade down toward the hilt to expose the battery bay and circuit board and allow the handle to slide off the blade. Use the flat head screwdriver to push on the attachment pins that anchor the blade to the top of the circuitry. The light saber blade will come off the hilt but should have a power wire still attached to it.