Home >> Toys >> Childrens Toys

Instructions for the Nano Zero Gravity

The Air Hogs Nano Zero Gravity is a remote-controlled car that is capable of climbing walls. By performing basic functions, such as charging the battery regularly, you can maximize your car's performance. It's also important to observe the limitations listed on the vehicle's instructions, especially those regarding the type of surfaces it can run and climb on.

Instructions

- 1
  Charge your Nano Zero Gravity when not in use. Slide the switch on the car and the controller to ̶0;Off.̶1; Slide the car into place on the charger and slide the switch to ̶0;Charge.̶1; Wait for the car to fully charge before removing it. Charging can take up to 50 minutes.
- 2
  Drive the car only on clean, dry and smooth surfaces, such as interior walls and floors.
- 3
  Slide the switch on the back of the car to ̶0;W̶1; to drive it on walls. Stand back from the wall at least four feet and press the controller's knob forward to advance the car toward the wall. The car will climb up the wall when it hits the corner.
- 4
  Turn the knob on the steering wheel on the Nano Zero Gravity controller to the right to make a right turn. Turn it left to make a left turn.
- 5
  Check the trim of the car if it does not drive straight. Slide the switch on the back of the car to ̶0;G̶1; and drive forward. Press the trim button that is the alternate of the direction the car pulls. For instance, if it pulls left, press the ̶0;Right̶1; trim button until the car straightens.

Childrens Toys